Relationship between electrode surface roughness and impulse breakdown voltage in vacuum gap of Cu and Cu-Cr electrodes

The relationship between the impulse breakdown voltage of vacuum gaps and electrode surface roughness was investigated for the purpose of controlling the surface roughness on HV conductors. The roughness of mechanically polished Cu and Cu-Cr electrodes was measured with a roughness meter, and the relationship between the breakdown voltage and surface roughness was obtained for plate-to-plate gaps. The discharge-conditioning effect increased with reduction in the surface roughness. The breakdown voltage depended not only on the roughness of the cathode but also on the anode surfaces. Reducing the surface roughness was found not to be an effective way to increase the breakdown voltage for non-uniform field gaps after discharge conditioning.     

Improvement of lysozyme recovery method from the precipitate of protein-anionic surfactant complexes

A new protein separation process using a surfactant and a polar organic solvent consists of a precipitation step and a recovery step. In the precipitation step, a protein-surfactant complex is precipitated from an aqueous solution, when an ionic surfactant, sodium di(2-ethylhexyl) sulfosuccinate (AOT), is added to an aqueous solution, including protein (lysozyme). In the recovery step, the precipitate is dissolved in a polar organic solvent, such as acetone, and the protein is recovered as precipitates when a very small amount of salt solution was added to remove surfactants from the protein-surfactant complex. However, the details of the protein recovery step from precipitate have not been studied yet. In this study, the improvement of the protein recovery step was examined from the viewpoint of a recovery ratio of protein and a remaining ratio of surfactant. The optimum NaCl concentration in the feed for the protein recovery was in the range of 0.05–0.2 kmol/m³. As the NaCl concentration in the feed increased to more than 0.2 kmol/m³, the precipitation ratio decreased due to the electrostatic screening effect of NaCl. It was found that the addition of a very small amount of NaCl solution to acetone was unnecessary when NaCl was included in the feed lysozyme solution. On the other hand, as the NaCl concentration decreased to less than 0.05 kmol/m³, the precipitation ratio was decreased due to the low re-precipitation of protein by the addition of a small amount of NaCl solution in acetone. In the case of the feed containing no salt, the desired NaCl concentration added to acetone was in the range above 0.2 kmol/m³. In addition, the most suitable volume ratio of acetone to feed was found to be 0.2.     

Colorless polyimides with low coefficient of thermal expansion derived from alkyl‐substituted cyclobutanetetracarboxylic dianhydrides

Alkyl‐substituted cyclobutanetetracarboxylic dianhydrides (CBDAs) were synthesized by photo‐dimerization of alkyl‐substituted maleic anhydrides to obtain novel colorless polyimides (PIs). Dimethyl‐substituted CBDA (DM‐CBDA) showed much higher polymerizability with various diamines than conventional cycloaliphatic tetracarboxylic dianhydrides and led to high molecular weights of PI precursors. Polyaddition of non‐substituted CBDA and trans‐1,4‐cyclohexanediamine (t‐CHDA) was completely inhibited by salt formation in the initial reaction stage. The use of DM‐CBDA allowed the formation of a homogeneous/viscous PI precursor solution by overcoming the salt formation problem. The prominent substituent effect probably reflects how the methyl substituents of DM‐CBDA contributed to increasing the salt solubility. Some of the thermally imidized DM‐CBDA‐based systems simultaneously possessed non‐coloration, low coefficient of thermal expansion (CTE), very high T_g exceeding 300 °C and very low dielectric constant. Copolymerization was very effective for improving the solubility of DM‐CBDA‐based PIs. The copolyimide cast films prepared via chemical imidization displayed a further decreased CTE without sacrificing other target properties, suggesting that the present materials can be useful as plastic substrates in display devices. The mechanism of self‐chain orientation behavior during solution casting is also discussed. A potential application of the copolyimide systems as optical compensation film materials in liquid crystal displays is proposed. © 2013 Society of Chemical Industry .     

Experimental validation with field circuit by changing start voltage of salient pole synchronous motor

This paper reports on the experimental validation characteristics of a salient pole synchronous motor with the starting field circuit in contact. The starting characteristics were experimentally evaluated at voltages of 100%, 75%, and 50% using a 1.5 kVA salient pole synchronous motor. The signal for pulling into step was applied to the field circuit by using the control module for all test conditions. The results confirmed the proper pulling into step at 100% of voltage, and the results of the tests at 50% and 75% of voltage revealed that the pulling into step under these conditions becomes stable at the suitable slip condition.     

Endothelin ETB Receptor-Mediated Astrocytic Activation: Pathological Roles in Brain Disorders

In brain disorders, reactive astrocytes, which are characterized by hypertrophy of the cell body and proliferative properties, are commonly observed. As reactive astrocytes are involved in the pathogenesis of several brain disorders, the control of astrocytic function has been proposed as a therapeutic strategy, and target molecules to effectively control astrocytic functions have been investigated. The production of brain endothelin-1 (ET-1), which increases in brain disorders, is involved in the pathophysiological response of the nervous system. Endothelin B (ET_B) receptors are highly expressed in reactive astrocytes and are upregulated by brain injury. Activation of astrocyte ET_B receptors promotes the induction of reactive astrocytes. In addition, the production of various astrocyte-derived factors, including neurotrophic factors and vascular permeability regulators, is regulated by ET_B receptors. In animal models of Alzheimer’s disease, brain ischemia, neuropathic pain, and traumatic brain injury, ET_B-receptor-mediated regulation of astrocytic activation has been reported to improve brain disorders. Therefore, the astrocytic ET_B receptor is expected to be a promising drug target to improve several brain disorders. This article reviews the roles of ET_B receptors in astrocytic activation and discusses its possible applications in the treatment of brain disorders.     

Characteristics of hydrogen-assisted intergranular fatigue crack growth in interstitial-free steel: role of plastic strain localization

The behavior of intergranular fatigue crack growth in an interstitial-free (IF) steel in a hydrogen environment was investigated at different frequencies. Focusing on the plastic strain localization, we observed details of the striation-like feature on the intergranular fracture surface, slip behavior around microvoids, and crystallographic orientation gradient underneath the fracture surface. It was determined that the intergranular fatigue crack growth mechanism in the IF steel is microvoid formation at the crack tip and subsequent coalescence with the crack. Moreover, it was found that the grain boundaries, acting as propagation paths, suffer from pre-damage arising from plastic strain localization near the grain boundaries even before the main crack propagates to a certain location. Therefore, fatigue cracks in a hydrogen environment easily propagate to the grain boundaries. The frequency dependence of fatigue crack growth in the hydrogen environment is significantly smaller than that in a low carbon steel, probably because of the frequency dependence of the pre-damage evolution behavior.     

Development of silicon wafer packaging technology for deep UV LED

This paper reports a deep‐ultraviolet LED (deep‐UV‐LED) package based on silicon MEMS process technology (Si‐PKG). The package consists of a cavity formed by silicon crystalline anisotropic etching, through‐silicon vias (TSVs) filled with electroplated Cu, bonding metals made of electroplated Ni/AuSn and a quartz lid for hermetic sealing. A deep‐UV LED die is directly mounted in the Si‐PKG by AuSn eutectic bonding without a submount. It has advantages in terms of size, heat dissipation, light utilization efficiency, productivity and cost over conventional AlN ceramic packages. We confirmed a light output of 30 mW and effective reflection on Si (111) cavity slopes in the Si‐PKG. Based on simulation, further improvement of the optical output is expected by optimizing DUV‐LED die mount condition.     

Physics‐based model of lithium‐ion batteries running on a circuit simulator

The authors developed a physics‐based equivalent circuit model of a lithium‐ion battery (LIB) whose parameters are continually updated, reflecting the theoretical calculation results of the Butler‐Volmer equation, diffusion equations of the lithium‐ion and lithium, and Nernst equations of the liquid and solid phases. The developed model was applied to the charge/discharge simulations of an LIB, and the experimental and simulated results of constant current discharges and pulsed‐charge/discharge were found to be in excellent agreement. In particular, using the developed model, analyzing transient responses of the LIB derived from the transition of the electric double layer charging to the electrode reaction is possible. These results demonstrate that the electrochemical performance of an LIB can be calculated on a circuit simulator using the developed model.     

Determination of atomistic deformation of tricalcium silicate paste with high-volume fly ash

We examined the effect of incorporating high-volume fly ash on the atomic arrangement and interatomic deformation behavior of calcium silicate hydrates in tricalcium silicate paste upon exposure to external forces. The interatomic structural changes and strains under compressive load were assessed using synchrotron in situ high-energy X-ray scattering-based atomic pair distribution function analysis. Three different types of strains, which were (a) macroscopic strains from gauges on the surfaces of specimen, (b) strains in a reciprocal space (Bragg peak shift), and (c) strains in real space (PDF peak shift), were compared to each other. All monitored and calculated strains for tricalcium silicate-fly ash (50 wt% fly ash) paste were compared with the counterparts of the pure tricalcium silicate paste. Pair distribution function analysis in the range of r < 10 Å indicated that the atomic arrangement of tricalcium silicate-fly ash was similar to that of synthetic calcium silicate hydrates followed by that of pure tricalcium silicate paste. Moreover, the pair distribution function refinement results revealed that the calcium silicate hydrate structure in tricalcium silicate-fly ash paste was similar to tobermorite 11 Å, unlike that in pure tricalcium silicate paste. The interatomic strain of tricalcium silicate-fly ash in the real space (r < 20 Å) was smaller than that of tricalcium silicate under compression, which suggested that the incompressibility of calcium silicate hydrates at atomistic scale was enhanced by the incorporation of fly ash into it. This was likely to be caused by the increased silicate polymerization of calcium silicate hydrates, which was attributed to the increase in the amount of silicate in their structure via the addition of fly ash.